A covered patio with stained concrete, an outdoor kitchen and patio chairs
Bayshore Epoxy Floors

Concrete resurfacing for Tampa lanais, patios and driveways

Concrete resurfacing puts a new surface on a sound lanai, patio, walkway or driveway, covering stains, worn spots and fine cracks without tearing the slab out. Outdoor concrete in Hillsborough County takes sun, rain, tires and storm season, so the system is built for outdoors.

  • Local Tampa-area installers
  • Free written quote
  • Lanais, patios, walkways, driveways
a stained, patterned concrete patio with outdoor furniture
Example: a stained, patterned concrete patio with outdoor furniture
a stained concrete patio around a shade tree
Example: a stained concrete patio around a shade tree

Example photos of finished floors, shown for the look. Not photos of a specific past job.

Why does regular epoxy fail on a lanai?

Standard epoxy is not UV-stable, so in Florida sun, even under a screen enclosure, it yellows, chalks and can start to lift; outdoor slabs need UV-stable coatings or a cement-based overlay instead.

A screen cage cuts the glare but not the ultraviolet light that breaks epoxy down, and lanais also catch blowing rain and the heat of the afternoon. Garage-floor products moved outdoors are a common reason a lanai floor looks bad within a couple of summers.

Outdoor systems are built differently: a cement-based overlay or a textured coating for grip, color that holds up in sun, and a sealer made for weather. Smooth high gloss stays indoors.

Screened lanais

Shaded but not protected from UV. A UV-stable color and sealer keep the floor from yellowing along the sunny edge.

Open patios

Full sun and standing rain. Texture matters as much as color, because wet concrete in the shade gets slick.

Walkways and entries

The first concrete a visitor sees. Stains, old patches and worn spots can be covered with one even color or a pattern.

What can resurfacing fix on a driveway, and what can it not?

It can cover oil and rust stains, worn and pitted surfaces, fine cracks and old patch marks; it cannot fix a slab that has sunk, heaved or broken into pieces that move.

Driveways in Tampa take hot tires, sprinkler water with iron in it and the occasional heavy truck. Resurfacing deals with what that does to the surface. If a section rocks underfoot, has dropped at a joint or has been lifted by a tree root, that piece has to be repaired or replaced first, and a good quote says so.

Rust and oil stains

Orange stains from well-water sprinklers and dark oil spots are cleaned as far as they will go, then covered.

Worn and pitted surface

Scaling and pitting are filled and leveled by the new layer.

Cracks

Fine cracks are filled. A crack that keeps moving can show through again, so it may need a joint cut instead of a cover.

Tire marks

Hot tires can mark or lift the wrong product. Driveways get a system made to be driven on.

Do Tampa HOAs have to approve a new driveway color?

Many do: deed-restricted communities across Hillsborough County often require architectural review for anything visible from the street, including driveway and walkway color.

Ask your association for its approved colors and its review form before you choose a finish. Getting the color and product approved first avoids redoing a driveway the association will not accept.

What does concrete resurfacing cost in Tampa?

It is priced after someone sees the concrete, because the area, the repairs and the system it needs move the number more than the color does.

A sound patio that needs a clean surface and a new color is a different job from a driveway with cracks, rust and an old sealer to strip. You get a written price before anything is booked.

Area

Square footage, plus steps, borders and edges.

Repairs

Cracks, broken edges, pitting and any section that has settled.

What has to come off

Old sealer, paint or a failing coating.

Overlay or coating

A cement-based overlay builds a new surface; a coating adds color and protection. Patterns and borders add time.

The finishes, under the lights

Keep scrolling to walk the floor. Your installer brings physical samples to the quote.

How does outdoor concrete get resurfaced?

Free visit and written quote

Someone looks at the concrete, checks for movement and loose spots, measures it and talks through colors, texture and pattern. You get a written price before anything is booked.

Clean and strip

Pressure cleaning, then old sealer or paint comes off so the new layer bonds to sound concrete.

Repair

Cracks, broken edges and pitted areas are filled.

Resurface

The overlay or base coat goes down with the texture you picked.

Color and sealer

Color, any pattern or border, and a sealer made for sun and rain.

Walkthrough

You get care instructions and a clear time for foot traffic and, on a driveway, for cars.

Floors that stop people at the door

How a floor gets done

Three stages, and you know the price before any of them start.

What moves the price

Two garages the same size can quote differently. These are the reasons.

Questions people ask before booking

Rather just ask?(656) 249-9690

Questions about outdoor concrete

Rather just ask?(656) 249-9690
How much does concrete resurfacing cost in Tampa?

It depends on the area, the repairs, any old sealer or paint that has to come off and whether the slab gets a cement-based overlay or a coating. Patterns and borders add time. Someone looks at the concrete first, and the written quote is free, so you know the number before anything is booked.

How long before I can drive on a resurfaced driveway?

It depends on the system, the temperature and the humidity. Driveways need longer than walkways and patios before they take the weight and heat of a car, so plan to park on the street for a while. The crew gives you a clear time for foot traffic and for cars before they leave.

Will it be slippery when wet?

Outdoor finishes are textured, and you choose how much grip you want. A sealed outdoor surface without texture can be slick in the rain or under a dripping screen enclosure, which is why texture is part of every outdoor system. Steps and pool-side areas can get a heavier texture than the rest.

Can it go over pavers?

No. Pavers move individually, so a resurfacing layer would crack along every joint. Paver driveways and patios are cleaned, re-sanded and sealed instead, which is a different job covered on the paver sealing page. Resurfacing is for poured concrete that is solid underneath but worn, stained or patched on top.

Will a resurfaced driveway hold up in hurricane season?

Rain and wind are not the problem for a well-bonded surface. Flooding that washes out the ground under a slab edge is, and that is a slab repair rather than a coating issue. After a storm, look for edges that rock or have dropped, and get those fixed before the surface is redone.

Book the visit

(656) 249-9690

    CallGet a free quote