A terracotta-colored concrete deck around a curved pool, with palms behind it
Bayshore Epoxy Floors

Pool deck resurfacing for Tampa homes

A stained, cracked or slick pool deck can often be resurfaced instead of torn out. A textured coating over sound concrete gives wet feet more grip, and a lighter color is easier on bare feet in July.

  • Local Tampa-area installers
  • Free written quote
  • Decks, steps and pool walkways
a stained concrete deck along a backyard pool
Example: a stained concrete deck along a backyard pool
a stone-pattern deck finish around a curved pool
Example: a stone-pattern deck finish around a curved pool

Example photos of finished floors, shown for the look. Not photos of a specific past job.

Can an old pool deck be resurfaced instead of replaced?

Usually, yes, as long as the concrete underneath is sound: the deck is cleaned, cracks and broken spots are repaired, and a new textured surface goes over the top.

Most Tampa pool decks that look tired are not structurally bad. The paint is peeling, an old cool-deck finish is chipping at the edges, furniture has left rust spots, or hairline cracks have spread across the slab. Those are surface problems, and a surface system can fix them.

What resurfacing cannot fix is movement. A section that has sunk, lifted or sounds hollow when tapped has to be repaired or replaced first. Someone checks for that before a price is given, because a coating over a moving slab cracks again.

Poured concrete decks

The usual candidate. Cleaned, repaired and coated with a textured system made for outdoor concrete and bare feet.

Painted or old cool-deck surfaces

Loose or flaking material comes off first. A layer that is still well bonded can sometimes stay as the base, and that gets checked at the quote.

Pavers and travertine

A different job. Pavers and stone are normally cleaned and sealed rather than coated, because each piece moves on its own and a coating would crack along the joints.

What makes a Tampa pool deck hard on a coating?

Sun, water and pool chemistry, all at the same time, almost every day of the year.

A garage floor sits in the shade. A pool deck takes full sun, splash, rain from the afternoon storms and chlorinated or salty water drying on it. A system that works fine indoors can yellow, chalk or lift outside, which is why outdoor decks get materials chosen for sun and water rather than a garage coating moved outdoors.

Sun

Ultraviolet light breaks down coatings that are not built for it, and plain epoxy yellows and chalks outdoors. Pool deck systems use UV-stable materials, and lighter colors stay noticeably cooler underfoot than dark ones.

Chlorine and salt systems

Splash dries and leaves chlorine or salt on the surface. With a salt system, crystals can build up in the pores and wear the top layer, so any deck benefits from a fresh-water rinse now and then.

Summer rain

The concrete has to be dry enough before anything is applied, so in the rainy season the work is planned around the afternoon storms.

Wet bare feet

A smooth gloss is the wrong finish next to a pool. Deck coatings are textured, and the texture is chosen with grip and comfort in mind.

What does pool deck resurfacing cost in Tampa?

It is priced after someone sees the deck, because the condition of the concrete and the size of the area move the number more than the coating itself does.

Two decks of the same size can quote very differently. One needs a wash and a new surface; the other has old paint to strip, cracks to repair and a rusted spot to cut out. You get a written price before anything is booked.

Size and shape

Square footage, plus steps, curves and the edge along the coping, which all take more time than open deck.

Repairs

Cracks, broken edges, rust spots and any section that has settled.

What has to come off

Old paint or a failing cool-deck layer is removed before the new surface goes on.

Texture and color

A single color is simpler than a pattern, borders or a second color.

Access

Screen enclosures, furniture, pool equipment and how far materials have to travel to the back yard.

The finishes, under the lights

Keep scrolling to walk the floor. Your installer brings physical samples to the quote.

How does a pool deck get resurfaced?

Free visit and written quote

Someone walks the deck, checks for cracks, hollow spots and loose coating, measures it and talks through colors and texture. You get a written price before anything is booked.

Clean and strip

The deck is pressure cleaned to remove dirt, algae and salt residue, and anything loose comes off so the new surface bonds to sound concrete.

Repair

Cracks and broken edges are filled and leveled so they do not show through the finish.

Texture coat

A textured base goes down for grip, in the pattern you picked.

Color and sealer

The color coat and a sealer made for sun and pool water go on top.

Walkthrough

You walk the deck with the installer and get care instructions and a clear time for when bare feet, furniture and the pool can be used again.

Floors that stop people at the door

How a floor gets done

Three stages, and you know the price before any of them start.

What moves the price

Two garages the same size can quote differently. These are the reasons.

Questions people ask before booking

Rather just ask?(656) 249-9690

Questions Tampa pool owners ask

Rather just ask?(656) 249-9690
How much does it cost to resurface a pool deck in Tampa?

It depends on the deck. Square footage, steps and curves, the repairs the concrete needs, any old paint or cool-deck layer that has to come off, and the texture and color you pick all change the price. Someone looks at the deck first, and the written quote is free, so you know the number before anything is booked.

Will a resurfaced deck be slippery when it is wet?

Pool deck coatings are textured for grip, and you can ask for a heavier texture on the steps and around the ladder. No surface is completely slip-proof where people climb out of a pool, but a textured coating gives wet feet far more grip than smooth paint or a worn, slick slab.

Can you coat over pavers?

Usually not. Each paver moves on its own, so a coating laid across them cracks along the joints. Paver decks are cleaned, re-sanded and sealed instead, which is covered on the paver sealing page. Resurfacing is for poured concrete decks and older painted or cool-deck surfaces that are still sound underneath.

Is a coated deck a good idea with a saltwater pool?

Yes, when the system is chosen for it. Salt from the pool dries into the surface and can wear the top layer, so deck systems for salt pools use materials that tolerate it. Rinsing the deck with fresh water now and then keeps salt from building up, whatever the deck is coated with.

When is the best time of year to redo a pool deck?

Late winter and spring are the busiest months, because the deck is ready before swim season and the weather is drier. Summer work is possible too; it is scheduled around the afternoon storms, since the concrete has to be dry before anything is applied. Ask early if you want it done before school lets out.

Book the visit

(656) 249-9690

    Related pages

    Bayshore Epoxy Floors works across Hillsborough County. Back to the main site.

    CallGet a free quote