A large warehouse with a bright, glossy light gray coated floor
Bayshore Epoxy Floors

Commercial epoxy flooring for Tampa businesses

Bayshore Epoxy Floors installs commercial epoxy and quartz floors for Tampa kitchens, warehouses, taprooms, showrooms and salons, each with the system the space needs. Call to talk it through, or send the basics and someone will walk the space before quoting.

  • Local Tampa-area installers
  • Free written quote
  • Scheduled around business hours

Commercial floors

a quartz floor in a commercial kitchen, taped for the coved edge
Example: a quartz floor in a commercial kitchen, taped for the coved edge
a light solid-color coating in a large open hall
Example: a light solid-color coating in a large open hall
a flake floor in a dealership service area
Example: a flake floor in a dealership service area
a textured quartz floor in a prep kitchen
Example: a textured quartz floor in a prep kitchen
a solid gray coating in an office with glass walls
Example: a solid gray coating in an office with glass walls
a coved quartz base where the floor meets the wall
Example: a coved quartz base where the floor meets the wall

Example photos of finished commercial floors, shown for the look. Not photos of a specific Bayshore job. Ask for photos of comparable work on the walkthrough.

Which floor system fits which kind of business?

The way the room is used decides it: wet kitchens need texture and a sealed edge at the walls, warehouses need a hard-wearing surface for wheels and markings, and customer-facing rooms are chosen for the look.

A floor that is right for a showroom can be wrong for a kitchen. The questions on a walkthrough are practical ones: how much water hits the floor and where it drains, what gets spilled, what rolls across it, how it is cleaned and how long the business can close. The system follows from the answers.

Restaurant and commercial kitchens

Florida restaurant inspections look for floors in food areas that are smooth, durable, nonabsorbent and easy to clean. Quartz-broadcast systems with a coved base at the walls are a common answer: textured for grip and seamless enough to hose down.

Warehouses and distribution

Along the I-4 corridor and around the port, floors take forklifts, pallet jacks and dropped loads. Solid-color coatings brighten the space and make spills easy to see, and aisle and safety striping can go in with the system.

Breweries and taprooms

From Ybor City to Seminole Heights, brewery floors are wet all day with water, sugars and cleaning chemicals. They need texture, care around every drain and a system matched to the heat and chemicals involved, which gets decided on the walkthrough.

Showrooms, salons and gyms

Flake and metallic floors carry the look in rooms customers see, and hold up to foot traffic, rolling chairs and gym mats.

What matters on a business floor?

Five things decide most commercial jobs: when the work can happen, how soon each area takes traffic again, grip, what gets spilled on it, and how it gets cleaned.

Those answers come from you on the walkthrough, and they decide the system more than the color does. A brewery in Ybor City, a gym in Westchase and a distribution bay near the port can all be the same size and need three different floors.

Nights and weekends

Work can be booked after closing or over a weekend so the business stays open. Bigger floors are done one zone at a time while the rest of the space keeps running.

Back to foot traffic, carts and forklifts

Every system has its own cure times, and Tampa heat and humidity move them. You get a written time for each area: when people can walk on it, when carts and pallet jacks can roll, and when forklifts and full use come back.

Slip resistance

Quartz or grit broadcast into the coating adds grip where floors get wet or greasy: kitchens, wash bays, entries, around drains. More texture means more grip and slightly more work to clean, so it is set area by area.

Chemical and stain resistance

Oil, coolant, degreasers, sugars, sanitizers and hot washdown each call for a different topcoat. Tell us what hits the floor and how often, and the system is chosen to match.

Easy cleaning

A coated floor is seamless, with no grout lines to hold dirt, and can be mopped, auto-scrubbed or hosed down depending on the system. A coved base at the walls closes the gap where floor meets wall.

How is commercial floor work scheduled around a business?

It is planned on the walkthrough, usually in sections, after hours or over a closure, so the business keeps running.

Each coating needs time to cure before it takes foot traffic, carts or forklifts, and some have a strong odor while they cure. Those two facts set the schedule. A restaurant might be done over a closed weekend; a warehouse is often done one zone at a time while the rest keeps shipping.

After hours and weekends

Work can often be scheduled when the space is closed, so staff and customers never see it.

One section at a time

Large floors can be split into zones, with traffic moved around the area being coated.

What does commercial epoxy flooring cost in Tampa?

Commercial floors are priced per project after a walkthrough, because the system, the prep and the schedule change the cost more than the square footage does.

A clean slab in an empty unit and a working kitchen with old tile to remove can be the same size and nothing alike in cost. You get a written price and a plan before anything is booked.

The existing floor

Old coatings, tile, adhesive or oil-soaked concrete all add removal and prep.

The system

A thin coating, a thicker quartz system or a heavier build for wet, hot areas.

Edges and drains

Coved bases, trench drains, floor sinks and transitions take hand work.

Scheduling

After-hours, weekend or phased work changes the labor plan.

The finishes, under the lights

Keep scrolling to walk the floor. Your installer brings physical samples to the quote.

How does a commercial floor project run?

Walkthrough and written quote

Someone walks the space with you, asks how it is used and cleaned, checks the slab and talks through the schedule. You get a written price and a plan before anything is booked.

Moisture test

The slab is tested before a system is chosen, because moisture coming up through concrete is the most common reason coatings lift.

Prep

Old coatings and adhesives come off, and the surface is diamond-ground with dust collection so the system bonds into the concrete.

Repairs, drains and edges

Cracks and joints are repaired, and coving and drain details are built where the space needs them.

Coating system

The base, the texture or color and the topcoat go down, zone by zone if the schedule calls for it.

Handover

You walk the floor and get care instructions and the times when each area can take people, equipment and full use.

Floors that stop people at the door

How a floor gets done

Three stages, and you know the price before any of them start.

What moves the price

Two garages the same size can quote differently. These are the reasons.

Questions people ask before booking

Rather just ask?(656) 249-9690

Questions business owners ask

Rather just ask?(656) 249-9690
How much does commercial epoxy flooring cost?

It is priced per project. The condition of the existing floor, the system the space needs, coving and drains, and when the work can happen all change the number more than the square footage does, so it is quoted after a walkthrough. The walkthrough and the written quote are both free.

What kind of floor does a restaurant kitchen in Florida need?

Food areas need a floor that is smooth, durable, nonabsorbent and easy to clean, and a coved base where the floor meets the wall makes cleaning easier. A textured quartz system is a common choice because it adds grip in wet areas. Confirm the details with your inspector before work starts.

Can the work happen while we stay open?

Often, yes, by working after hours, over a closed weekend or one section at a time while the rest of the space keeps running. Cure times and odor decide what is possible in each area, so the schedule is worked out on the walkthrough and written into the quote before anything is booked.

Can safety lines and aisle markings be added?

Yes. Striping, marked walkways and colored zones are usually built into warehouse and shop floors as part of the coating system rather than painted on later, so they wear with the floor. Bring a sketch of the layout you want, or ask about colors and widths on the walkthrough.

Who should call about a bid?

Owners, managers, property managers and general contractors. Call, or send the basics with the form: the type of space, roughly how big it is, what the floor is now and when work could happen. Someone gets back to you to set up a walkthrough and talk through the options for the space.

Request a site walk

(656) 249-9690

    Photos help with the bid: text a few of the space to (656) 249-9690 after you send this.

    Bonded and insured.

    Related pages

    Bayshore Epoxy Floors works across Hillsborough County. Back to the main site.

    CallGet a free quote