A large bright showroom with a glossy floor and tall columns
Bayshore Epoxy Floors

Showroom and retail floors for Tampa shops, salons and showrooms

Bayshore Epoxy Floors installs decorative coated and polished floors in Tampa showrooms, shops, salons and boutiques, the floors your customers see first. Call to talk it through, or send the basics and someone will walk the space before quoting.

  • Scheduled around your hours
  • Finishes chosen for the look
  • Free written quote

Retail and showroom floors: example floors

a polished concrete floor in a long brick showroom
Example: a polished concrete floor in a long brick showroom
a deep blue metallic floor
Example: a deep blue metallic floor
a flake floor in a showroom
Example: a flake floor in a showroom
a gray metallic floor in a customer-facing space
Example: a gray metallic floor in a customer-facing space

Example photos of finished commercial floors, shown for the look. Not photos of a specific Bayshore job. Ask for photos of comparable work on the walkthrough.

What matters on a showroom floor?

The look under your lighting, and staying open. The floor sells the space, and the work has to fit around trading hours.

A retail floor also has to clean up every day after foot traffic, rolling racks and carts, and still look the same a few years on.

The look customers see

Metallic, flake, solid color or polished concrete, chosen with samples under your own lighting.

Planned around trading hours

Work is usually phased after close, one area at a time. Prep, the system and its cure time decide when each area is back in use, and that goes in the written schedule.

Daily cleaning

A sealed, seamless floor mops clean, with no grout lines to darken over time.

Racks, carts and chairs

A hard-wearing surface for rolling racks, carts, salon chairs and display moves.

Your brand colors

Solid and metallic systems can be tinted to sit with your brand and fixtures.

Which system fits a showroom?

Metallic or flake for a decorative look, a solid color for a clean modern one, or polished concrete where the slab is sound and flat.

The slab decides some of it. A floor with cracks and patches polishes into a floor with cracks and patches, so a coating may suit it better.

How is a showroom floor priced?

Per project, after a walkthrough. The existing floor, the system the space needs and when the work can happen change the cost more than the size does.

You get a written price and a schedule before anything is booked. The walkthrough and the written quote are free.

The existing floor

Old coatings, tile, adhesive or oil-soaked concrete all add removal and prep.

The finish

Metallic and custom-tinted systems take more steps than a solid color.

Scheduling

After-hours, weekend or phased work changes the labor plan.

The finishes, under the lights

Keep scrolling to walk the floor. Your installer brings physical samples to the quote.

How does the project run?

Walkthrough and written quote

Someone walks the space with you, asks how it is used and cleaned, checks the slab and talks through the schedule. You get a written price and a plan before anything is booked.

Moisture test

The slab is tested before a system is chosen, because moisture coming up through concrete is the most common reason coatings lift.

Prep

Old coatings and adhesives come off, and the surface is diamond-ground with dust collection so the system bonds into the concrete.

Repairs, drains and edges

Cracks and joints are repaired, and coving and drain details are built where the space needs them.

Coating system

The base, the texture or color and the topcoat go down, zone by zone if the schedule calls for it.

Handover

You walk the floor and get care instructions and the times when each area can take people, equipment and full use.

Floors that stop people at the door

How a floor gets done

Three stages, and you know the price before any of them start.

What moves the price

Two garages the same size can quote differently. These are the reasons.

Questions people ask before booking

Rather just ask?(656) 249-9690

Questions owners and managers ask

Rather just ask?(656) 249-9690
Can you do the floor without closing the store?

Usually. The work is phased after close, one area at a time, with displays moved around the section being coated. Prep, cure times and odor decide what is possible in each window, so the order and the dates are planned on the walkthrough and written into the quote before booking.

Polished concrete or a coating for a showroom?

Polished concrete suits a sound, flat slab and a clean industrial look. Metallic, flake and solid-color coatings cover patched or uneven slabs and give more color and pattern. Both clean up well. The slab and the look you want decide it, and samples help on the walkthrough.

Can the floor match our brand colors?

Solid-color and metallic systems can be tinted, so the floor can sit with your brand colors and fixtures. Bring a swatch or your brand colors to the walkthrough and we will show samples under your lighting, because the same color reads differently in every space.

Request a site walk

(656) 249-9690

    Photos help with the bid: text a few of the space to (656) 249-9690 after you send this.

    Bonded and insured.

    Related pages

    Bayshore Epoxy Floors works across Hillsborough County. Back to the main site.

    CallGet a free quote