
Auto shop floor coating for Tampa service bays and dealerships
Bayshore Epoxy Floors coats floors in Tampa auto shops, service bays, detail shops and dealership service areas, scheduled around the bays you need open. Call to talk it through, or send the basics and someone will walk the shop before quoting.
- Bay by bay
- Built for oil and hot tires
- Free written quote
Auto shop and service bay floors: example floors




Example photos of finished commercial floors, shown for the look. Not photos of a specific Bayshore job. Ask for photos of comparable work on the walkthrough.
What matters on a shop floor?
Oil, heat, impact and keeping bays open. The floor takes fluids, hot tires, jacks and dropped tools every day.
A shop floor that is easy to clean also makes the shop look professional to the customer standing at the service counter.
Oil, coolant and brake fluid
A sealed floor keeps fluids on top where they wipe up, instead of soaking into the concrete.
Hot tires and jacks
A system chosen for hot tire pickup, jack stands and rolling equipment.
Dropped tools
Flake and heavier builds take impact and hide small marks better than a thin film.
Grip around the lifts
Texture in the coating gives grip where fluids get on the floor around lifts and wash bays.
Bay by bay
Bays can be done one or two at a time, or over a weekend, so the shop keeps working.
Which system fits an auto shop?
Usually broadcast flake for service bays, a heavier quartz or mortar build in the hardest-working bays, and a decorative finish where customers walk.
Wash bays and detail areas get more texture. The fluids you use and how you clean the floor are the questions that decide it.
How is a shop floor priced?
Per project, after a walkthrough. The existing floor, the system the space needs and when the work can happen change the cost more than the size does.
You get a written price and a schedule before anything is booked. The walkthrough and the written quote are free.
The existing floor
Old coatings, tile, adhesive or oil-soaked concrete all add removal and prep.
The bays
Heavy-use bays and wash bays need more build and texture than the customer area.
Scheduling
After-hours, weekend or phased work changes the labor plan.
The finishes, under the lights
Keep scrolling to walk the floor. Your installer brings physical samples to the quote.
How does the project run?
Walkthrough and written quote
Someone walks the space with you, asks how it is used and cleaned, checks the slab and talks through the schedule. You get a written price and a plan before anything is booked.
Moisture test
The slab is tested before a system is chosen, because moisture coming up through concrete is the most common reason coatings lift.
Prep
Old coatings and adhesives come off, and the surface is diamond-ground with dust collection so the system bonds into the concrete.
Repairs, drains and edges
Cracks and joints are repaired, and coving and drain details are built where the space needs them.
Coating system
The base, the texture or color and the topcoat go down, zone by zone if the schedule calls for it.
Handover
You walk the floor and get care instructions and the times when each area can take people, equipment and full use.
Floors that stop people at the door
How a floor gets done
Three stages, and you know the price before any of them start.
What moves the price
Two garages the same size can quote differently. These are the reasons.
Questions people ask before booking
Questions owners and managers ask
Can you coat the shop while we keep working?
Usually, yes. Bays are done one or two at a time, after hours or over a weekend, while the rest of the shop keeps working. Cure times decide when each bay takes foot traffic, jacks and cars again, and that schedule is written into the quote before anything is booked.
Will hot tires lift the coating?
Hot tire pickup happens when a coating is too soft for the heat or the slab was not ground open enough to bond. The system is chosen for vehicle traffic, and the concrete is diamond-ground before coating so it bonds into the slab instead of sitting on top.
Is a coated shop floor slippery with oil on it?
Texture is broadcast into the coating where fluids get on the floor, around lifts, in wash bays and at the doors. More texture means more grip and a little more work to clean, so the amount is set bay by bay with you on the walkthrough.
Related pages
Bayshore Epoxy Floors works across Hillsborough County. Back to the main site.