A garage with a white metallic epoxy floor and a classic roadster parked on it
Bayshore Epoxy Floors

Epoxy flooring for Brandon and Valrico homes

Bayshore Epoxy Floors installs epoxy and flake garage floors in Brandon, Valrico and Seffner, where many garages are older slabs with oil stains, worn paint or a store-bought kit that has started to peel. Most of those floors can be redone; the old layer just has to come off first.

  • Serving Brandon, Valrico and Seffner
  • Free written quote
  • Old coatings removed
walls and edges taped off before a new coating goes down
Example: walls and edges taped off before a new coating goes down
a gray metallic floor in a large open room, a finish also used for garage gyms and workshops
Example: a gray metallic floor in a large open room, a finish also used for garage gyms and workshops
a marbled gray metallic floor in a large room with tall windows
Example: a marbled gray metallic floor in a large room with tall windows

Example photos of finished floors, shown for the look. Not photos of a specific past job.

Why is my old garage floor coating peeling?

Most peeling floors were rolled onto concrete that was never ground, so the coating sat on top; hot tires, moisture from the slab and years of sun then lift it in patches.

Brandon and Valrico have plenty of homes from the 1970s through the 2000s, and a lot of those garages have had a weekend kit or a coat of floor paint at some point. Those products are thin, and they bond only as well as the cleaning before them. The usual pattern is peeling under the tires first, then near the door, then anywhere water sits.

The fix is not another coat over the top. The old material is ground off down to clean concrete, and the new system bonds into the slab itself.

Hot tire pickup

A hot tire softens a thin coating and pulls it up. Peeled patches in the shape of tire tracks are the sign.

Moisture from below

White powder, bubbles or peeling on the low side of the floor point to moisture moving up through the slab.

Sun at the door

Plain epoxy and floor paint yellow and chalk where the afternoon sun reaches them.

What does an older Brandon slab need before it is coated?

More prep than a new one: old paint or coating removed, oil cleaned out, cracks and chipped joints repaired, and a moisture check, since older homes may not have a vapor barrier under the slab.

Decades of parked cars leave oil in the concrete, and oil stops a coating from bonding. It is cleaned and ground out as far as it goes. Older slabs also tend to have wider cracks, chipped control joints and patches from past repairs, all of which are filled and ground flush so they do not show through the new floor.

Oil stains

Degreased and ground out. Deep stains are sealed with a primer so they do not bleed through.

Old paint and kits

Ground off completely. A coating over a failing coating fails with it.

Cracks and joints

Filled and ground flush. Moving cracks are treated differently from settled ones.

Moisture

The slab is tested, and a moisture-tolerant primer goes down where it reads high.

When is a crack more than a coating problem?

When it keeps widening, one side sits higher than the other, or doors and windows in the house start sticking at the same time; in east Hillsborough, where sinkholes do happen, that is a question for an engineer first.

Hillsborough County is one of the parts of Florida where sinkholes are reported most often, and Brandon, Valrico and Seffner sit right in it. Most garage cracks have nothing to do with that; they are shrinkage or settling, and they are filled as part of prep. But a crack that is still moving comes back through any coating, so it gets looked at before a price is given.

Hairline and settled cracks

Normal in older slabs. Filled and ground flush during prep.

Cracks that keep moving

Can be cut and filled as a joint, so the coating has room to move with them.

Signs to check first

A widening crack, an uneven step across it, or doors that suddenly stick. Have it looked at before any coating goes down.

What does an epoxy garage floor cost in Brandon?

It is priced after someone sees the slab; on older floors, the removal and repair work usually moves the price more than the coating itself.

Two garages of the same size can quote very differently. One is bare concrete that needs grinding; the other has a peeling kit, oil stains and cracked joints to deal with first. You get a written price before anything is booked.

Size

One, two or three car bays, plus a workshop or storage area.

Removal

Old paint, a peeling kit or a failed epoxy ground off.

Repairs

Oil, cracks, chipped joints and any moisture primer.

Finish

Flake, metallic or solid color, with a UV-stable topcoat.

The finishes, under the lights

Keep scrolling to walk the floor. Your installer brings physical samples to the quote.

How is an old garage floor redone?

Free visit and written quote

Someone looks at the slab and the old coating, checks the cracks, measures the garage and shows you physical samples of finishes. You get a written price before anything is booked.

Strip and grind

The old coating and the top of the slab are diamond-ground off with dust collection, down to clean concrete.

Moisture test and oil

The slab is tested for moisture, and oil-soaked spots are cleaned and primed.

Crack and joint repair

Cracks, pits and chipped joints are filled and ground flush.

Base coat and finish

The base coat goes down with flake, metallic or solid color, as you chose.

Topcoat and walkthrough

A UV-stable topcoat seals it. You get care instructions and a clear time for foot traffic and cars.

Floors that stop people at the door

How a floor gets done

Three stages, and you know the price before any of them start.

What moves the price

Two garages the same size can quote differently. These are the reasons.

Questions people ask before booking

Rather just ask?(656) 249-9690

Questions from Brandon and Valrico homeowners

Rather just ask?(656) 249-9690
Can you coat over my old garage floor paint?

No, and you would not want it. A new coating is only as strong as the layer under it, so a floor painted or kit-coated years ago is ground down to clean concrete first. That removal is often the biggest part of the job on older Brandon garages, and it is what keeps the new floor from peeling.

Will oil stains show through a new floor?

Most do not. Oil is degreased and ground out as far as it goes, and deep stains are sealed with a primer before the base coat. A flake finish hides any faint shadow that is left. Very old, soaked-in spots are noted at the quote, so you know what to expect.

Should I worry about sinkholes before coating my garage?

Most garage cracks are shrinkage or ordinary settling, and they are filled during prep. If a crack keeps widening, one side sits higher than the other, or doors in the house have started sticking, have an engineer look at it first. A coating covers cracks; it cannot fix ground that is moving.

Can a garage workshop or gym get the same floor?

Yes. Workshops usually get flake for grip and to hide dropped screws and sawdust, and home gyms get a solid or flake floor under rubber mats where the weights go. Tell the installer what happens in the space, because heavy equipment and dropped weights change which system makes sense.

How much does a garage floor cost in Brandon?

It depends on the garage. The size, how much old coating has to come off, the oil, cracks and joints to repair, and the finish you choose all move the price. Older floors usually need more prep than new ones. Someone looks at the slab first, and the written quote is free.

Book the visit

(656) 249-9690

    CallGet a free quote